Note
：
“HDCP Key Index” is used to number the HDCP. Please set the appropriate number
when you burn the HDCP at the first time. The number would +1 if the burning was successful each
time.
4.6 Enter and exit the aging state
(1)In TV mode, use the remote control to enter the factory menu, and press
△
/
▽
button to choose
“Burn In” option.
(2) Press right direction button on the remote control to set the item to “ON” to enter the aging
state.
(3) Press “EXIT” button to exit the factory menu, and TV enters the aging status at once. At this
point, Screen Saver function is closed, TV will not enter into standby mode automatically if no signal
inputs.
(4) Enter the factory menu, set the “Burn In” item to “OFF” , press “EXIT” button again and TV
will exit the aging state. If Screen Saver is On and no signal inputs, TV will enter into standby mode
automatically in 5 minutes; When Screen Saver is Off, TV will not enter into standby mode
automatically even if no signal inputs.
