Sansui HDPDP4250, Руководство пользователя

Страница: 6 / 56

6
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When
placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
Notes when mounting the Plasma TV on a wall
When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the Plasma
TV and the wall. Clearance of less than 6 cm (2 1/2 inches) will obstruct the vents and may cause the interior of
the unit to overheat, resulting in damage to the unit.
If the unit is to be mounted on the wall, contact the retailer where you purchased the Plasma TV for advice, and
have the equipment professionally installed. Incomplete or improper installation may cause injury to you and/or
the Plasma TV.
Bracket holes: To attach a wall mounting bracket (not supplied) here, remove the screws.
IMPORTANT NOTICE
Possible Adverse Effects on Plasma Screen: If a fixed (non-moving) pattern remains on the plasma screen
for long periods of time, the image can become permanently engrained in the plasma TV panel and cause subtle
but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never leave your
plasma TV on for long periods of time while it is displaying the following formats or images:
Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on
a normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right sides of screen).
To avoid the engraining, we recommend that you use the screen saver function (see page 41).
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim
any responsibility for these symptoms.
Plasma TV panels are manufactured using an extremely high level of precision technology, however
sometimes parts of the screen may be missing picture elements or have luminous spots. This is not a sign
of a malfunction.
Do not install the Plasma TV near electronic equipment that is susceptible to electromagnetic waves. Some
equipment placed too near this unit may cause interference.
Effect on infrared devices – There may be interference while using infrared devices such as infrared
cordless headphones.
•
•
•
•
•
•
•
•
SAFETY PRECAUTIONS
10cm
Bracket holes
30L0401A.indb 6 30L0401A.indb 6 12/20/2006 10:54:12 AM 12/20/2006 10:54:12 AM