21
4.5.1
POWER LED
The
TowerRAID TR4UTP/TR4UT-BP
has one Amber color Power LED. The table shows Power LED function and operation.
DESCRIPTION
GREEN LED
Power On
On
Power Off
Off
4.5.2
PC LINK LED
The
TowerRAID TR4UTP/TR4UT-BP
has one Green color PC Host Link LED. The table shows PC Link LED function and
operation.
DESCRIPTION
GREEN LED
PC Link Unplugged / No Power
Off
PC Link plugged (Idle)
On
PC Link plugged (Active)
On
4.5.3
HRAD DISK DRIVE LED
The
TowerRAID TR4UTP/TR4UT-BP
has five HDD LEDs (Green and Red) on the front panel. The table shows HDD LED
function and operation. These LEDs behave as follows:
DESCRIPTION
GREEN LED
RED LED
HDD Unplugged / No Power
Off
Off
HDD plugged (Idle)
On
Off
HDD plugged (Active)
Blink (On)
Off
Error State (One or More Bad Partial Volumes)
Off
On
HDD Rebuild (A Physical Partition is being Rebuild; i.e. Mirroring Mode)
Off
Blink (On)
4.6
MODE SETTING
The
TowerRAID TR4UTP/TR4UT-BP
with the device’s LEDs to indicate status. To select a storage policy in this mode the first
time that a new factory-shipped product is used, ensure that the hard disk drives are installed; turn off the power before set
the MODE SWITCH on the back of the
TowerRAID TR4UTP/TR4UT-BP
to the desired Storage Policy. To change the storage
policy thereafter, set the MODE SWITCH to the desired position and press and hold the recessed SETUP BUTTON, than
power on to create the new virtual volume(s). Creating new virtual volumes will destroy any existing data that existed on
the previous volume.
Note: Before reconfiguring a volume, back up your data and delete previously defined partitions.
4.6.1
CLEAN MODE
The CLEAN MODE storage policy requires a minimum of 1 drive to implement.
1. Turn off the power.
