SanRex SANARG 160P, Руководство оператора

Страница: 13 / 82

13
SYMBOL SOURCE OF HAZARD HAZARD HOW TO AVOID
Optical Radiation and Arc
Heat
Thermal
Establish a written policy
documenting general safety
requirements for the wearing of
contact lenses. Conduct an eye
hazard evaluation in the
Workplace.
Cuts, Scrapes, Heat,
Flames, Molten Metal,
Wet Gloves, Insulation
Failure
Mechanical,
Thermal,
Electrical
Gloves should be:
Dry and moisture resistant.
In good condition, no holes or
tears.
Flame resistant.
Electrically and thermally insulated
to suit the process.
Coating of Steel
Fumes and
Gases
Obtain the Material Safety Data
Sheets (MSDSs) for all materials
used. Read and understand the
specification for coating type and
coating weights. Find out what
hazardous materials are present or
might be given off by the coating
when it is exposed to the arc of
high temperatures.
Reactive Force from Tools,
Tool Jammed or Coming
Loose
Mechanical
Wear proper head, eye and hand
protection.
Use face shields, safety glasses, and
goggles as appropriate.
Inspect tools before use.
Never use a tool that is in poor or
faulty condition.
Keep all tools in good condition.
Engine-Driven Generators,
power source Equipment
Health Hazard
Reduce the intensity of the source.
Shield the source where practical.
Use engineering control methods,
such as room acoustics, to control
noise.
Place Body Between
Welding Electrode and
Work Cables
Electric &
Magnetic Fields
Do not place your body between
the welding electrode and work
cables. Route cables on the same
side of your body.
Route the welding cables close
together. Secure them together
with tape or cable ties.