Sanremo Portofino, Инструкция пользователя

Страница: 17 / 40

17
- When the LRCV LED is off, heating is disabled.
- When the LRCV LED is on, heating is enabled.
NB - to save energy, if hot water and/or steam is not required, the boiler can be turned off at any moment using the KRCV key.
Wait for steam to be discharged from the steam nozzle, then close the tap and check that the pressure indicated on the boiler pressure gauge is
steady at about 1:1.2 bars. If this is not the case, adjust using the pressure switch adjustment screw (+ to increase, - to decrease).
Hot water delivery
Make sure the boiler pressure gauge shows a pressure of 1:1.2 bars. Turn the tap knob (C) anticlockwise.
Take great care to avoid burns.
Steam delivery
The steam nozzle is located alongside the work surface. It is retractable and can be oriented by means of a ball joint. To deliver steam, turn the
knobs (B) anticlockwise.
Take great care to avoid burns.
Coffee delivery
NB - Coffee can be delivered with the steam boiler either off or on.
- Start heating the coffee group (heat exchanger) by pressing the KRGR1 and/or KRGR2 key. Make sure the LRGR1/LRGR2 and LEGR1/LEGR2
LEDs come on.
- Place the cup under the coffee spout (D).
- Open the door (G) on top of the appliance and place the capsule in the guide (fig. 1).
- Close the door (G) and press lightly.
When the door (G) is closed, the pusher connected to the door pushes the new capsule. This in turn expels the previous one which falls into the
capsule collection tray (F) (fig. 2).
- Coffee delivery: press the coffee key (KEGR1 and/or KEGR2) to start delivery, then once the required quantity has been reached press again to
stop delivery.
ENGLISH ENGLISH