Sanosil Q-Jet Compact
12
4.5.2
Setting up the Device
Please read and follow important safety directions on page 6
before use!
•
Switch on the device
(Display flashes)
•
Enter time in minutes through
number buttons
(If mistake or change: renewed time
input by pressing arrow button
“left“)
•
Confirm time input by pressing Return/Enter
•
Start disinfection program by pressing return/Enter
(signal starts peeping)
•
Device starts in 20 seconds! (Count-down in action) Please leave room immediately!
•
During the course of the disinfection program the display shows the remaining time (Count-down).
•
At the end of the disinfection program the device makes a beeping noise 5 times.
•
Room re-entry minimum waiting-time begins (minimal 120 Minutes)
.
•
After the end of the waiting-time the room can be prepared for re-entry (please see 4.5.3)
•
Shortening of waiting time: after a
minimal waiting time of 120 minutes
place a strong dehumidifier in the middle of
the room and dehumidify room for at least 60 minutes or air room by opening a window or HVAC. Use full protection
equipment when placing dehumidifier!
•
When room re-entry is required before treatment process is completed or to perform a H
2
O
2
level check, proper personal
equipment (PPE) including wraparound style goggles; respirator mask (filter class ABE1) filtering hydrogen peroxide (for
example: 3M 4277 or 3M 7500 mask with 6057 filter) and gloves should be worn to safely enter the room.
INDICATION
A running disinfection program can be stopped anytime by pressing the number button 0!
Do only enter the room wearing protection mask, safety googles and gloves!
0
T:01
sym
1
abc
2
def
3
ghi
4
jkl
5
mno
6
pqrs
7
tuv
8
wxyz
9
0
i
0
ENTER
buttons
