Schlagsahne-Automaten
Operating instruction SANOMAT - technical changes are subject to modifications and amendments - liability- and
warranty claims due to improper use are basically excluded - The design of the machine and several parts may vary from
pictures - the function stays the same
21
•
Was the cream frozen or too
warm?
⇒
fill in new cream with a temperature about
+6°C!
⇒
air regulation might be blocked!
Disassemble valve and clean it.
•
After some time, did the
cream settle?
⇒
stir cream well!
•
Air regulation is glued with
cream
⇒
thoroughly clean the air regulation and
carry out a complete disinfection cleaning
•
Was poor cream used or
cream of low fat content?
⇒
try another brand. We suggest taking at
least 32% fat content
The portions are unbalanced (AUTO)
•
Are the portions unbalanced?
•
check that air regulation and gaskets are
firmly seated!
Shipping Information
If you need to move the SANOMAT to a different location, or want to leave it with someone else, the
following is very important:
Pass along operating instructions and all supplies and parts that came with the unit!
Always transport SANOMAT in upright position! If moved on its side, damage to the
refrigeration unit may result!
Remember to let the unit stand idle for 2 hours before starting again!
This time is needed for the refrigeration unit to recover from movement during transport!
Disposal Instructions
Refrigeration units always contain chemical refrigerants. Therefore, at the end of their service life,
they must be disposed according to regulations!
Never put machine into household garbage!
The manufacturer will take back your old cream machine and dispose it
according to the regulations!
