background image

If you are unable to set the desired dosage

make sure that there is enough insulin in the 

insulin container. If you do not have enough 

insulin left in your SoloStar you can choose 

between: 

- Taking the number of units of insulin that you 

have in your current SoloStar and taking the 

remaining dosage out of a new SoloStar, or 

- Injecting the entire dosage with a new 

SoloStar.

Holding down the button

Insulin may drip out of the needle for a bit after 

you have pressed the injection button. You 

must hold the button down for 10 seconds to 

ensure that you receive your entire dosage.

Storage of your SoloSTAR

Always have an extra SoloStar in storage in 

case you lose the one you are using or in case 

it fails for some reason.

Before use

Store SoloStar in a refrigerator until you start 

using it. When you take a new SoloStar from 

the refrigerator, keep it in room temperature 

for 1–2 hours before use as cold insulin is 

painful to inject. 

Tips and advice

During use

After removing a SoloStar from the refrigera-

tor, the insulin can last for up to 28 days. 

During this time you can store your SoloStar 

at room temperature; however, not in tempe-

ratures higher than 25°C. 
Do not store SoloStar where it can become 

overheated. Protect SoloStar from sunlight.
After 28 days you must throw away your 

SoloStar, even if there is insulin remaining.
Do not use SoloStar after the best-before-

date specified on the pen or cartridge.

If you need to clean

 the outside of your 

SoloStar, wipe it with a damp cloth. Do not 

soak or wash your SoloStar and avoid soap or 

solvents.

If you have questions

 about your SoloStar, 

please call our customer service on 020-52 68 

87 which is open  24 hours a day.

Содержание SoloStar









Отзывы: