Liftkar SAL I 8
2.5 ASCEND BUTTON IN UPPER HANDLE
This button [Q] is only active in the ascent mode and switches the lifting mechanism on and off.
2.6 SAFETY FLAP
To start tilting a load, it may be necessary to use your foot to assist in tilting. The axle of the conventional sack
truck is normally used for this purpose. With the LIFTKAR SAL, the swing arm with the support wheels, a wheel,
or the drive unit may be used to support by foot. The safety flap is installed to prevent your foot getting jammed
in by the swing arm. If you press onto the lower part of the flap with your foot all functions will be stopped.
SAFETY INSTRUCTIONS:
You avoid all risk if you switch on only after tilting the load.
2.7 MAIN SWITCH
The main switch is situated on the battery cover. The power supply is switched on or off by way of the main
switch.
2.8 SWITCHING OFF
Battery power is removed:
By switching off the main switch on the battery unit
By removing the battery
By pressing button (P) for 3 seconds
Automatically after 10 minutes
The main switch or removal of the battery provide a higher degree of safety than switching off
with the button P or with the timer cut-out, as button P may be touched inadvertently.
