Use
r’s Manual Sanli LS42 - LSP42 - LSP46-LBP46 / 9
3.1
Preparing the mower for work
3.11 Mower assembly
1.
Mower
shown
in
delivery
position with handlebars folded (fig.1)
2. Attach the handlebars using the
key supplied (fig.2)
3. Lock the handlebars in position
using quick-release clamps (fig.3)
4. Fasten the starter cord to its support (fig.4)
3.12 Filling the mower’s engine with oil
For transport reasons, your new mower’s engine does not contain oil when
despatched from the factory. Before use, ensure that the mower contains oil.
Please refer to the Briggs & Stratton owners manual supplied with the LBP46 for any engine
related questions on this machine
WARNING: Never run the engine without oil even for a short period.
Always use a high quality oil of API SF
standards and SAE30 or 15W40 viscosity.
When filling the engine with oil, position
the mower on a firm, level surface
Unscrew the oil filler cap and remove the
dipstick (fig.5).
Slowly pour in the oil. The correct capacity
of the engine’s oil sump is 650 ml.
Insert the dipstick up to the filler neck but
do not screw it in. Remove the dipstick and
read the oil level by holding the dipstick
horizontally. The oil level must reach the maximum mark on the
dipstick (fig.6).
If too much oil has been added to the engine, the excess can be drained
out by tipping the mower onto its side with the air filter and
carburettor uppermost.
