Use
r’s Manual Sanli LS42 - LSP42 - LSP46-LBP46 / 13
To activate the transmission, push the full-width
advance lever at the rear of the handlebar forwards
so that the lever presses against the handlebar
(fig.12).
While the machine is moving, hold the lever flexibly
so it can be released easily when needed.
To stop drive to the wheels, release the advance lever.
Note: The transmission operates only when the engine is running
To use the mower manually without driving the wheels, do not touch the
advance lever at the rear of the handlebar.
Similarly, when making U-turns, tight turns or when finishing off, release the
advance lever and move the mower across the ground manually.
3.23 Stopping the mower
To minimise possible risk of accidents, the engine of your SANLI lawnmower is
coupled to an operator control. When the operator control lever is released,
it returns immediately to its rest position and the engine is automatically
turned off.
To stop the mower, move the throttle lever to its stop position and
release the operator control lever. The engine and the blade will
stop turning automatically.
If there is a build-up of grass beneath the chassis, stop the engine, remove the
spark plug cap and wait until the engine has cooled before clearing the grass.
3.3 Cleaning, storage, transportation and maintenance
Before working on the cutting system of the machine, switch off the engine
and remove the spark plug cap.
3.31 Cleaning the mower
Cut grass is damp. Regular cleaning after each use will ensure better
functioning of the mower and reduce the risk of corrosion or seizure.
Having finished mowing, allow the engine to cool then remove
accumulated grass clippings from and around the engine with a brush.
