SANLI BSB 33, Руководство пользователя

Страница: 14 / 26

12
housing and put one foot against the base plate to prevent it slipping.
·
Pull the starter grip slowly with your right hand to 20cm and give it a brisk strong
pull.
·
Do not pull the starter rope out all the way as it might otherwise break.
·
Do not let the starter grip snap back.
·
Guide it slowly back into the housing so that the starter rope can rewind properly.
When the engine begins to fire:
·
If the engine is cold, open the choke
and continue cranking until engine runs
·
If the engine is warm, continue cranking
until engine runs.
As soon as engine runs:
·
Move the lever to the center position so that the engine settles down
to idle speed
Stopping the engine
·
Move the lever to “0” then the engine will be turned off.
If the engine does not start
If you do not open the choke quickly enough after the engine begins to
fire, the engine will stop.
·
Remove the spark plug cap
·
Unscrew and dry the spark plug
·
Set the stop switch to OFF
·
Pull the starter rope several times
to clear the combustion chamber
·
Fit the spark plug and reconnect the spark
plug cap
·
Move the stop switch to ON
·
Open the choke even if the engine is cold
·
Now start the engine
Fuel tank run until dry and then refueled
Stop Switch
Stop
Start