- 6 -
６．NOTES FOR THE MEASUREMENT
Measuring values may disperse according to measuring circumstances.
Electric Resistor Type Moisture meters use the applications of sensitively electric characteristics of
measuring objects against the moisture contents and the corresponding relations never be a perfectly
correlative one-to-one.
In case of measurinf with different compositions
･
combinations, albeit the same material, and with
changes in quality, salt, contamination, and furthermore with special processing, chemical treatments,
it may be necessary to avert measuring such unfavorable objects, and compensate or average
measured values. As for compensating, it is in general, based on moisture measurement methods
in accordance with a drying process.
７．BATTERY
7-1 Indication of the voltage drop
When
[
BAT
]
showing the voltage drop is indicated
in the lower left of the LCD display
⑥
, the batteries
close to the limit of use due to consumption.
・
Open the battery case on back side by sliding the lid
⑨
sideward, take out the battery case of the Meter taking care
the wiring and replace all alkaline dry batteries LR03(1.5V)
2 pcs. with new ones. (ensure the limit of use).
When the Meter is continuously used after voltage drop mark
[
BAT
]
was indicated on the LCD display, following
condition will occur.
・
Though it differs depending on the characteristics and
using condition of the dry batteries, the Meter can work for several hours.
(
Replace all 2 batteries with fresh ones earlier.
)
・
When the Meter is continuously used as it is, measured values will become unstable.
・
When the
「
POWER
」
key is turned ON, the buzzer continuously sounds and key operation become
impossible simultaneously.
(
Remove the batteries from the Meter.
)
・
When no indication is on the LCD display, the batteries are completely consumed.
7-2 Handling while the Meter is not in use
・
Even if the
「
POWER
」
key OFF, the battey capacity has been slightly consumed.
・
In case the Meter will be not used for 1 month or more, it is recommended to store the Meter after
removing the batteries from the case.
８．MAINTENANCE AND INSPECTION
・
Wipe dirt off with soft cloths, etc. after using the Meter.
Specially care to keep the electrodes and groove between the electrodes, etc. clean and dry.
・
Prevent the Meter from exposing to shock, direct sunlight, high temperature, high humidity, etc.
・
Select a dust free, clean and well-dried place for storing the Meter.
・
In case the Meter will be not used for 1 month or more, remove the batteries from the Meter.