SANKO AQ-30 Скачать руководство пользователя страница 3

- 2 -

Before using the Meter, read this INSTRUCTION MANUAL thoroughly and use
the Meter correctly.
Keep this INSTRUCTION MANUAL carefully and refer to this, when necessary.

1.

APPLICATIONS

Moisture measurement, inspection control and instraction of soft/hard wood and following paper,
mortar/concrete and plaster, etc.

Wood:

Log, sewn lumber, seasoned wood, wood for buildings, fittings, panels and packings

Plywood, veneer, texitile wood, laminated wood, various board, floorings, etc.

Wooden works/parts such as desk, chair, furniture, etc.

Paper:

High quality paper, craft paper, paper board, wall paper, other paper and products

Corrugated paper, paper bag, paper vessel, internal paper, other paper products and semi-processed goods

Moisture control and check of the old paper etc. such as used news paper and magazine
while storing and keeping.

Mortar and Concrete:

Mortar, concrete, plaster, etc.

Quality control of base materials for finish coating, tiling, clothing, etc.

Quality control of various water proofing and decorating works, etc.

Prevention of claim after completing the work

Moisture condition of various objects can be checked simply and quickly in the MC mode.

2.SPECIFICATIONS

Name and type

Moisture meter for building material AQ-30

Measuring method

DC electric resistance method

Measuring range

Wood: 6.5 to 100% (SOFT(soft wood), HARD(hard wood) by conversion)
Paper: 6.5 to 30% (all paper products)
Mortar: 2 to 11% (concrete and plaster)
M/C mode: 1 to 50 division (no unit, comparison of moisture)

Resolusion

0.5%, 1%, 2%, 5%, 10%, 20% (Depend on measuring range and mode)
M/C mode: 1

Indication

LCD digital with hold function

Temperature compensation Automatic temperature compensation (Available for ON/OFF)
Power source

Alkaline dry batteries LR03(1.5V) × 2 pcs. With auto power off function

Operating temperature

0 to 40

(except dew condensing condition)

Dimensions and Weight

56(W) × 123(H) × 34(D)mm, Approx.100g

Accessories

Spare needles, Hexagonal wrench, Conductive rubber electrode,
Cover for needle electrode

Option(Attachment)

SB wire gauze electrode, Roller electrode
Moisture reading checker

Specifications and appearance are subject to modify for improvement without prior notice.

Содержание AQ-30










Отзывы: