SANKI S-CON MINI SCLV, Руководство по эксплуатации и обслуживанию

Страница: 7 / 8

7
3. BELT REPLACEMENT OF CENTER DRIVE TYPE SZLV MODEL
⑩ Remove under covers on knob side and motor side. →See fig. 1.
⑪ Remove side cover L.
⑫ Remove all the return rollers. (The number of return rollers depends on
machine length.)
⑬ Remove take- up pulley, referring to “S -CON
®
MINI-Z Series Operating and
Service Manual”, p.24.
⑭ Remove snub pulley, referring to “S -CON
®
MINI-Z Series Operating and
Service Manual”, p.24.
⑮ Remove stand bracket.
⑯ Remove drive side plate L. →See fig. 2.
NOTE: For correct reinstallation of drive side plate L, mark its initial position
before removal. Incorrect installation position causes belt deviation.
⑰ Replace the belt.
NOTE: When installing replacement belt, confirm direction of belt travel written
on belt undersurface.
⑱ Reinstall all the removed parts. Take up the belt and make belt alignment
adjustment, referring to “S -CON
®
MINI-Z Series Operating and Service
Manual”, p.2 1-23.
図 -1 ：ドライブ下面
図 -2 ：ドライブ側面