20
Touch screen activation switch
The device features a touch screen display. To prevent the
screen from being activated accidentally, keep the touch
screen activation switch set to
OFF
when the device is not in
use. To operate the device, move the touch screen activation
switch to
ON
. When the touch screen display is touched
(
START/STOP
button or
MEM
button), a beep is output.
Tip:
You can switch off the device at any time by setting the
touch screen activation switch to the
OFF
position.
Cuff holder
Thanks to the cuff holder on the underside of the device,
you have the option of conveniently storing the cuff. To do
so, push out the cuff holder with both thumbs until it locks
into place (see also Chapter: Inserting battery).
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Pump up, release air (arrow)
6. Memory display, average value ,
morning , evening , Number of
memory space
7. WHO classification
8. “Change battery” icon
9. Arrhythmia recognition
4. Prepare measurement
Inserting battery
• Push the cuff holder up-
wards at the rear of the
device until it locks into
place.
• Open the battery com-
partment lid.
• Insert four AA 1.5 V
alkaline batteries. mak-
ing absolutely sure that you insert them with the correct
polarity as marked. Never use rechargeable batteries.
• Replace the battery cover carefully.
If the battery change
is continuously illuminated,
measurement is no longer possible and you must replace all
the batteries. Once batteries have been removed from the
device, the time must be reset.
Used batteries do not belong in the household waste. You
are legally obliged to dispose of the batteries. Dispose of
them via your specialist electrical supplier or local collec ting
point for recyclable waste.
2
3
4
6
7
8
9
1
5