Sanitas SBM 06, Руководство по эксплуатации

Страница: 21 / 60

1
Press SET button to set the correct minute (0,1,2,3,... 59).
e Press MODE button again to switch to normal time.
(month, date, hour and minute appear on the display).
C. Steps to take blood pressure measurement:
a Wrap the cuff around the wrist (Refer to Wrapping of Wrist cuff as (Figure
No. 4 and 4-1).
b Sit upright on the chair to have correct posture. (Refer to Correct Posture
in Taking Blood Pressure as (Figure No. 5).
c First, select the memory place (No1, No2 or No3) with the Set key. Then
press the Start/Stop key. After the self-test showing the complete dis-
play, the device automatically shows the selected memory place once
again and then starts the measurement automatically. The air pressure
increases to 195 mmHg, and if there is a tendency towards high blood
pressure, the air pressure is increased automatically to the required level.
Do not move or talk during the measurement.
If you are carrying out repeat measurements, please ensure that you have
always selected “your“ personal user memory.
d After the cuff pressure is increased, it will slowly decreased. When the
pulse rate is detected, HEART RATE symbol will start flashing.
e After taking blood pressure measurement, the Systolic rate, Diastolic rate
will be lasting flash on the display for 1 minute.
f You can interrupt measurement at any time by pressing the "START/
STOP" button.
D. Storing, recalling and erasing measurement data:
a Storing data:
After every blood pressure measurement, the systolic pressure, diastolic
pressure, pulse rate and the time and date of the respective measure-
ment are stored automatically in the previously selected user memory.
When more than 30 measurements are stored, the oldest ones are lost.
b Recalling data:
Press the “MEMORY“ key and select the desired user memory 1, 2 or 3