Sanitas SBG 21, Инструкция по эксплуатации

Страница: 17 / 56

17
5. Device description
1. Electrodes
2. Display
3. “Down” Pushbutton
4. “SET” Pushbutton
5. “USER” Pushbutton
6. “Up” Pushbutton
2
1
3 4
5
6
6. Initial use
Inserting the batteries
If present, pull the battery insulating strip off the battery compartment cover or remove the battery’s pro-
tective film and insert the battery according to the polarity. If the scale fails to operate, remove the battery
completely and insert it again.
Positioning the scale
Place the scale on an even, hard surface; a hard surface is crucial for achieving
accurate measurements. Do not place the scale on carpet.
7. Operation
7.1 Weight measurement
Place the scale on a firm level floor (no carpet); a firm floor covering is required for correct meas-
urement. Press quickly and forcefully with your foot on the platform of your scale!
The entire display (Fig 1) appears up to “
0.0
” (Fig. 2) as a self-test (tap-on
technology).
Now the scale is ready to measure your weight.
Fig. 1
0.0
kg
Fig. 2
Stand on the scale without moving about and distribute your weight evenly on
both legs. The scale immediately begins to measure your weight (Fig. 3).
The scale switches off 10 seconds after you step down from it. The measuring
result remains visible during this time.
Fig. 3
Make sure that you always switch on the scale first and wait for the display “
0.0
” (Fig. 2) before stepping on.