17
Icons in the display:
1. Time and date
2. Systolic pressure
3. Diastolic pressure
4. Measured pulse
5. Number of memory space
6. Inflate/deflate arrow
7. Change battery icon
8. Cardiac arrhythmia
icon
9. Classification of measurements
4. Prepare measurement
Inserting battery
• Remove the battery cover (left side of the unit).
• Insert two 1.5 V micro batteries (alkaline, type LR03).
Make absolutely sure that you insert the batteries with
the correct polarity as marked. Do not use recharge-
able batteries.
• Replace the battery cover carefully.
If the change battery icon
is displayed, measure-
ment is no longer possible and you must replace all the
batteries.
Battery disposal
• The empty, completely flat batteries must be disposed
of through specially designated collection boxes,
recycling points or electronics retailers. You are legally
required to dispose of the batteries.
• The codes below are printed on batteries containing
harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury.
Setting date and time
It is vital to set date and time. Only in this way is it possi-
ble to save and subsequently retrieve your measured val-
ues with the right date and time.
Time is shown in 24 hour format.
Note:
If you hold down
MEM
, you can set the values faster.
• Press
START
and
MEM
simultaneously. The month
starts flashing. Using the
MEM
button, set the month 1
to 12 and confirm with
START
.
• Set the hour and minute and confirm in each case with
START
.
1
7
4 6
2
5
8
9
3
Содержание SBC 41
Страница 60: ...60 753 327 0715 ...