Sanitas SBC 28, Инструкция по эксплуатации

Страница: 13 / 44

13
Icons in the display:
1. Battery level indicator
2. Storage space
3. Average value of the 3
most recent measure-
ments - AVG
4. Systolic pressure
5. Diastolic pressure
6. Measured pulse
7. Cardiac arrhythmia icon
8. Pulse icon
9. Memory Zones
10. WHO - classification
11. Pump up, release air (arrow)
12. Time and date
4. Prepare measurement
Inserting battery
• Remove the bat-
tery cover (left
side of the unit).
• Insert two 1.5 V
micro batteries
(alkaline, type LR03).
Make absolutely sure that you insert the batteries with the cor-
rect polarity as marked. Do not use rechargeable batteries.
• Replace the battery cover carefully.
• The symbol appears if the batteries are new.
If the battery change symbol is flashing and E6 appears,
no more measurements are possible and you must replace all
batteries.
After inserting the batteries, the year appears on the display
and you can then set the date and time.
They are considered to be toxic waste and, as such, should be
disposed of in special containers, toxic waste collection points
or brought to electrical goods dealers. You are legally obliged
to dispose of the batteries.
Note: You will find these markings on batteries
containing harmful substances: Pb = battery
containing lead, Cd = battery containing
cadmium, Hg = battery containing mercury.
Setting date and time
It is vital to set the date and time. This is the only way that
measurements can be saved and recalled with the correct date
and time.
Proceed as follows to set the date and time:
1. After inserting the batteries:
• The year appears on the display. Using the +/M button, you
can increase the basic values to be set. Set the year and
confirm the entry using the button .
• Now set the month using the +/M button. Confirm using the
button.
• Set the day/hour/minute and confirm each using the but-
ton.
• To switch off, press the Start/Stop button .
1 2
3
4
5
6
7 8 9
10
11
12