Sanitas SBC 27, Инструкция по эксплуатации, Страница: 2 / 40

2
Please read these instructions for use carefully and keep
them for later use, be sure to make them accessible to other
users and observe the information they contain.
1. Getting to know your instrument
The wrist blood pressure monitor is used for non-invasive
measurement and monitoring of adults‘ arterial blood pres-
sure. You can use it to measure your blood pressure quickly
and easily, storing the results and displaying the progression
of readings. A warning is issued for anyone suffering from
cardiac arrhythmia.
The values determined are classified and graphically evalu-
ated according to WHO guidelines.
Keep these instructions carefully for further use and also let
other users have access to them.
2. Important information
Advice on use
• Always measure your blood pressure at the same time of
day, in order to ensure that values are comparable.
• Relax for approx. 5 minutes before each measurement.
• You should wait five minutes before measuring a second time.
• The readings that you take may only be used for information
purposes – they are not a substitute for a medical examina-
tion! Discuss your results with the doctor. Never use them to
make medical decisions independently (e.g. regarding medi-
cation and dosage thereof).
• If circulation on one arm is restricted as a result of chronic
or acute vascular disease (including vasoconstriction), the
precision of any wrist measurement is impaired. In this
case, use a blood pressure monitor for the upper arm.
• There may be incorrect measurements where there is car-
diocirculatory disease, as well as with very low blood pres-
sure, circulatory disorders, dysrhythmia and other preexist-
ing diseases.
• Only use the instrument on persons whose wrist has the
right circumference for the instrument.
• You may only operate the blood pressure monitor with bat-
teries. Note that it is only possible to save data when your
blood pressure monitor is receiving power. As soon as the
batteries are dead, the date and time on the blood pres-
sure monitor are lost. Any measurement results that have
been stored are however retained.
• The automatic switch-off function switches off the blood
pressure monitor in order to preserve the batteries, if no
button is pressed within one minute.
Storage and Care
• The blood pressure monitor is made up of precision elec-
tronic components. Accuracy of readings and the instru-
ment‘s service life depend on careful handling.
– You should protect the device from impact, moisture, dirt,
major temperature fluctuations and direct exposure to the
sun‘s rays.
– Never drop the device.
G ? W
ENGLISH