7
System requirements for the “Sanitas HealthCoach” app
Bluetooth
®
4.0, iOS from Version 7.0, Android
TM
devices from
Version 4.3 with Bluetooth
®
Smart Ready
List of compatible devices:
4. Preparing the measurement
Inserting the batteries
•
Open the battery compart
-
ment lid.
•
Insert four 1.5V AA (alkaline
type LR6) batteries. Make
sure that the batteries
are inserted the correct
way round. Do not use
rechargeable batteries.
•
Close the battery compartment lid again
carefully.
•
All display elements are briefly displayed, 24 h flashes
in the display. Now set the date, time and Bluetooth
®
as
described below.
If the low battery indicator
is permanently displayed,
you can no longer perform any measurements and must re-
place the batteries. Once the batteries have been removed
from the device, the time must be set again.
Used batteries should not be disposed of in normal
household waste. Dispose of them via your electronics re-
tailer or your local recycling point. You are legally obligated
to do so.
Note:
The codes below are printed on batteries containing
harmful substances: Pb: battery contains lead, Cd: battery
contains cadmium, Hg: battery contains mercury.
Setting the hour format, date, Bluetooth
®
and time
It is essential to set the date and time. Otherwise, you will
not be able to save your measured values correctly with a
date and time and access them again later.
To set the date, Bluetooth
®
and time, proceed as follows:
• I
nsert the batteries, or press and hold the setting button
SET
for at least 5 seconds if the batteries have already
been inserted.
•
Select 12h or 24h mode using the
+
button. Confirm with
SET
The year starts flashing. Set the year with the
+ but-
ton and confirm with
SET
.
•
Set the month, day, hour and minute and confirm each
with the setting button
SET
.
4 x AA (LR6) 1,5 V
