16
Motor will not start.
Electric Plug
Push plug securely into outlet.
Try another outlet.
Check circuit breaker.
Motor suddenly stops.
Thermal Cut Off
Refer to page 7.
Does not clean the carpet
Disposable Dust Bag
Change the bag and clean or replace the
or floor.
and Filter(s)
filter(s). Hint: If picking up fine dust, the bag
may not look full but a fine substance tends
to reduce suction when it blocks the airflow
through the paper bag and filter(s).
Dust Bag
Be sure hose adapter inserts into paper bag.
Belt
Replace a cut, loose or out of shape belt.
Belt Cover
Snap the belt cover inside the hood if it comes
loose.
Brush Roll
Clean hair and thread from bristles and end
cap area. Replace brush roll if bristles are worn.
Hose
Remove any clogs from the hose that restrict
the airflow. Check short hose in the base and
long hose. Refer to page 13 & 14.
No suction at the end of
Hose Adapter
Hose adapter has to seat inside the dust bag.
the hose.
Disposable Dust Bag
Change the bag and clean or replace the
and Filter(s)
filter(s). Hint: If picking up fine dust, the bag may
not look full, but a fine substance tends to reduce
suction when it blocks the airflow through the
paper bag and filter(s).
Hose
Remove any clogs from the hose that restrict the
airflow. Check short hose in the base and long
hose. Refer to page 13 & 14.
Noise from the brush roll
Brush Roll
Remove hood and clean debris or items
area.
from the brush roll area.
Belt
Replace a cut, loose or out of shape belt.
Cleaner is hard to push.
Cleaner Height Setting
Put handle in operating position. Tilt the
cleaner back to raise the front wheels off floor.
Then turn the knob to a higher setting.
Belt
Replace a cut, loose or out of shape belt.
Cleaner height knob will
Cleaner Height
Hint: Put handle in operating position. Tilt the
not turn.
Setting
cleaner back to raise the front wheels off floor.
Then turn the knob.
PROBLEM SOLVING
NOTE: Turn off the switch and unplug the electrical cord before servicing.
PROBLEM
CAUSE
SOLUTION
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
✓
