;
y
;
y
Rinsable Motor Filter
Check the motor filter with each disposable dust
bag change. Clean or replace as needed.
To Clean Rinsable Motor Filter
1.
Remove filter from inside bag compartment,
lower left side.
2. Shake filter or vacuum with another cleaner
to remove excess dust.
3.
Reinstall filter. Slide under back ledge and
filter retainer. Install with colored/smooth side
down.
Rinsable HEPA Filter
Check the Micron filter with each disposable dust bag change. Replace twice a year or as needed.
Latch
;;
;;
yy
yy
Back Ledge
Filter Retainer
3
1 and 3
We recommend using only Genuine Electrolux
Filters.
15
To replace Rinsable HEPA Filter into
filter
frame.
1. Place new filter in filter frame. Place bottom tabs of filter
frame into slots.
2. Rotate filter frame toward cleaner.
3.
Push upward on the latch to secure into place.
;;
;;
yy
yy
Filter
Filter
Frame
To remove Rinsable HEPA Filter from
filter frame.
1.
Push down latch and pull filter frame back.
2.
Then lift filter up and out of filter frame.
Filter Frame plus filter
(depending on your
vacuum model)
3
Rinsing Directions for Rinsable Filters -
Filter can be rinsed up to 6 times. Replace after 6 rinsings
to retain filtration level performance from your vacuum.
1. Remove soiled filter from cleaner.
2. Examine filter on both sides.
3. Gently rinse both sides of the filter with warm tap water to remove surface dirt. DO NOT COMPLETELY SOAK FILTER.
DO NOT USE SOAP OR DETERGENT.
4. Let the filter dry for at least 12-24 hours. FILTER MUST BE 100% DRY FOR PROPER PERFORMANCE. DO NOT
OPERATE VACUUM WITH WET OR DAMP FILTER.
5. Replace filter in vacuum cleaner.
