Sanipex BAGNODESIGN TOKO 3 BDM-TOK-303-A Series, Руководство по установке

Страница: 4 / 8

Assemble the article according to pictures:
•
drill the top according to the dimensions in figure 1
•
insert the uprights with the supplied kits in the holes from below; insert the
gaskets from above and screw the basis; screw the kits to fix the uprights
(figure 2)
• screw the rings (with the threaded part up) and then insert the handles by
pressing them (figure 3)
• insert the pre-assembled spout, placing the gasket between top and spout
basis (figure 4)
• fix the spout with the supplied kit and connect the flexible hoses to the
spout (figure 5)
• connect the hoses to the uprights and connect the hot and cold water
supplies.