Sanipex BAGNODESIGN BDR-HPA Series, Руководство по установке

Страница: 2 / 19

IMPORTANT PLEASE READ
Remove all packaging and check the product for missing parts or damage before
starting installation.
Any alterations made to this product and fittings may infringe water regulations and
invalidate the guarantee.
The Installation must comply with all Local/National Water Supply Authority
Regulations/Byelaws and Building and Plumbing Regulations.
We strongly recommend that your product be installed by a reputable qualified trade's
person.
General Installation:
To the Installer, please read and follow this instruction carefully, as the guarantee is only
valid if the product is installed as directed.
Don't rush, read the instructions first and run through them before you begin. Keep
fittings together to avoid loss. Do not over tighten screws or bolts.
If the product is covered with polyethylene protective film, do not remove until
installation is complete to grant maximum protection. However, remove film where any
two surfaces will be in permanent contact.
Please leave this installation manual with the end user once the product has been
installed.
Product Aftercare:
We recommend cleaning with a soft damp cloth and mild soap solution. Do
not use cream cleaners or cleaners containing bleach.
Do not scrub or scour.
Do not use abrasive cleaning agents.
Do not use solvent based cleaners.
Note :
U nder no circumstances should the mirror pad be cut.
This instaUation guide is for reference only. In case there is a discrepancy between that of the instructions and that of the actual
product, the fatter should be taken as standard. The rights of modifi'cation are reserved,
!