Copyright © SANHUA 2019
Subject to change without notice
II-SEC61-EN-R2010
c. Set/change parameters
Operation Status
Parameter 1
•
•
•
Parameter N
Parameter 1
•
•
•
Parameter N
Press for 3 seconds to input password
When display this screen, press untill display 5 (original password).
Then press to set parameters
Parameter 1
•
•
•
Parameter N
1. During operating status, long press for more than 3s, enter parameter setting mode
2. When screen show
, press until screen display 5 (original password), then press enter parameters table list
3. means parameters table1, press
can select or (switching parameter table)
4. After selected parameters table, press enter the table, if you want to switch other parameter tables, press return to the
parameter table select list
5. In parameters table, screen will directly display the parameter code, press can switch the code in parameters table
6. When the screen displays the parameter code which you want to modify, press can modify parameters directly,
and press will turn to next parameter or press return to the parameter table select list
7. After finish modifying, long press for 3s will save all settings and return to the operating interface.
10 / 17
