77
Frame Relay for Sangoma Cards (C) Sangoma Technologies Inc. 1999,2000,2001 Page 77 of 78
12. MS-DOS Error Messages
FLOAD.EXE
If FLOAD does not execute successfully, an error message will be displayed and an exit code will be
returned. The error messages and corresponding exit codes (DOS ERRORLEVEL) are as follows:
"
A command line error was found when executing FLOAD
" - an invalid command line argument
was used (exit code of 0x01).
The file FILENAME was not found
" - a filename listed in the command line arguments was not
found in the defined directory (exit code of 0x02).
"
The I/O port address PORT ADDRESS read from the command line is invalid
" - an invalid I/O
port parameter was specified in the command line arguments (exit code of 0x03).
"
The memory segment address MEMORY SEGMENT read from the command line is
invalid
" - an invalid memory segment address was specified in the command line arguments (exit code
of 0x04).
"
The memory offset address MEMORY OFFSET read from the command line is invalid
" - an
invalid memory offset address was specified in the command line arguments (exit code of 0x05).
"
The code running on the adapter is not the same as the original downloaded code
" - there is a
memory or I/O port address conflict in your PC. Change the I/O port address and/or the memory
segment and memory window parameters (exit code of 0x06).
"The downloaded code is not running on the adapter. Select a different memory address"
-
select a different memory address and run DLOAD again (exit code of 0x07).
"
The downloaded code is not running on the adapter
" - the card CPU has halted. Contact your
Sangoma representative (exit code of 0x07).
