9
liable for any damage
caused by the absence or
interruption of the protec-
tive conductor.
If the power supply ca-
ble is damaged, it must be
completely replaced by a
qualified technical per-
sonnel authorized by the
manufacturer to avoid
any danger to the user.
Repairs not performed by
certified technicians can
expose the user to seri-
ous dangers, for which
the manufacturer as-
sumes no responsibility.
Any repairs must be car-
ried out by the manufac-
turer’s authorized tech-
nical assistance service;
otherwise the manufac-
turer is not responsible
for any damage that may
result and the warranty
is void. Replace broken
or defective parts with
original spare parts; only
in this way can the manu-
facturer guarantee full
compliance with the qual-
ity and safety standards
set for his machine.
In case of breakdowns or
for cleaning and/or main-
tenance operations, keep
in mind that the dryer is
disconnected from the
power supply only if:
•
The power cord plug is
not inserted into the
socket.
•
The main switch of the
home electrical sys-
tem is off.
Do not install the appli-
ance in non-stationary
places (e.g. on ships).
No changes can be made
to the dryer that have
not been expressly au-
thorized by the manufac-
turer. The drying tech-
nology used is a heat
pump with gas refriger-
nate R290. This dryer is
equipped with a lamp that
illuminates the inside. It
is not suitable for light-
ing the environment. The
Содержание SDR8
Страница 2: ......
