SANGFOR WAN Optimization Controller User Manual
Device Deployment
The first thing you need to consider before deploying the physical Sangfor WAN Optimiztion
Controller (WOC) in your network is what deployment mode you should use, in that system and
network setting are subject to the deployment mode you choose. Take CDP and WCCP for
example. The two pages are available only in Acceleration Only service mode and Single arm
deployment mode.
Sangfor WOC supports Gateway Mode (or in-line mode in another term), Bridge Mode, Double
Bridge mode, Single Arm mode and Double Arm mode with Acceleration Only functionality, as
well as Gateway mode and Single Arm mode with VPN and Acceleation functionalities.
The followings sections describe what each mode is like and how to perform the essential
configuration.
Deploying WOC in Gateway Mode
Posit your Sangfor WOC on your network. Connect it to the other network (for details, please
refer to the section
1. Connecting Sangfor Device in Chapter 1). The network topology with WOCs deployed in
Gateway mode is as shown in the figure below:
2. Log in to the Web administrator console and go to System > Network > Deployment. Select
service mode Acceleration Only or VPN and Acceleration, and deployment mode Gateway
mode, as shown in the figure below:
18
