Sangean RCR-28, Руководство пользователя

Страница: 14 / 15

13
GB
Headphone socket
A 3.5mm headphone socket located on the rear of your radio is provided for use with
either headphones or an earpiece. Inserting Headphones or ear buds will automatically
mute the internal speakers.
Warning:
Excessive sound levels from ear buds and headphones can cause hearing loss. Always
listen at reasonable levels to avoid hearing loss.
USB socket for iPhone/Smartphone charging
Your radio has a USB socket which is intended only for charging an iPhone or smart
phone and similar devices. Charge time may vary and in some cases may take longer to
charge than when using the manufacturers charging unit supplied with the smart phone.
1. Ensure your radio is switched off.
2. Connect your smart phone to the USB charging socket on the rear of your radio.
3. Your iPhone or smart phone will begin to charge.
4. Once your iPhone or smart phone has fully charged remove the USB cable.
Important:
● The charger may not supply power to some USB devices.
● When not using or after charging, remove the USB cable.
● Do not connect power source to USB port. Otherwise there is a risk of fire. The USB
port is only intended for charging lower voltage device.
● Do not insert a nail, wire, etc. into the USB power supply port. Otherwise a circuit
short may cause smoke and fire.
● Do not connect this USB socket with your PC USB port, as it is highly possible that it
may cause breakdown of the units.
● Never use the USB socket in rainy or moist conditions to prevent moisture from
entering the radio.