Sangean RCR-11 WF, Инструкция по эксплуатации

Страница: 10 / 84

9
5.
6.
7.
8.
9.
0.
Press the Tuning buttons to choose an auto-update option for the clock. This can be updated
from DAB or FM radio, from the Network, or not updated. The default is to auto update from
the network. If you choose any other option, go to step 8. Otherwise you will first need to
select the correct time zone and daylight savings setting, see steps 6 and 7. If you choose “No
update” you will need to set the clock manually later(see the section of ‘Manually setting the
clock’). Press the Select button to confirm your choice.
Press the Tuning buttons to highlight the time zone which is applicable to your location.
Press the Select button to enter the setting.
You will then need to set the Daylight Savings option according to your location (Daylight
Savings is also known as Summer/Winter time). Press the
Tuning buttons to highlight “YES”
to turn on daylight savings if required or ‘NO’ if you do not wish to use daylight savings then
press the Select button to confirm the setting.
You will then need to set 'Keep network connected.' By default, your radio will shut down its
WiFi connection when it is in standby. This minimizes power consumption but it does mean
that you will need to switch that radio on manually in order to use either the 'Play to' function
or any other remote control software. If you need to be able to remotely control the radio
even when it has been put into standby, then press the Tuning buttons to highlight 'YES' to
activate this function or 'NO' to deactivate this function. you can also choose to keep the
network connected by using the ‘Keep network connected’ option in the network setting
menu. In the standby mode display either the WiFi signal indicator is shown with or without a
cross through it according to the chosen network settings.
The display will then show a list of WiFi regional options for the network set up. Press the
Tuning buttons to highlight the required region and then press the Select button to select it.
Your radio will then scan for available WiFi networks.
The radio will enter the Network Settings Wizard and will display ‘Scanning…’. After a short
while the display will show a list of the available WiFi networks.