5
Battery operation
1. Remove the battery cover on the rear of the unit by pressing
the catch.
2. Insert four UM-1 (D size) batteries into the spaces in
the compartment.
3. Take care to ensure all batteries are inserted with correct polarity
as shown on the rear cabinet. Replace the battery cover.
4. Reduced power, distortion and a “stuttering sound” or low battery
sign is flashing with an “E“ shown on the display are all signs that
the batteries need replacing.
5. If the radio is not to be used for any extended period of time,
it is recommended that the batteries are removed from the radio.
Using AC power adaptor
(not supplied in some markets)
The AC power adaptor required for this unit should be 6 volts DC
at 400 mA center pin negative.
Insert the adaptor plug into the DC socket on the left side of
the radio. Plug the adaptor into a standard mains socket outlet.
Whenever the adaptor is used, the batteries are automatically
disconnected. The AC adaptor should be disconnected from the
main supply when not in use.
