Sangean MMR-88, Руководство по эксплуатации

Страница: 9 / 70

GB
8
Note:
The best performance of the solar panel will be achieved when the sun
is directly overhead, and the sunlight is unobstructed by clouds, foliage,
curtains etc. In certain situations and poor light conditions, the solar
panel may not be effective and should not be relied upon as the primary
energy source for standard usage. The solar panel is designed as a
supplementary energy source which under suitable light conditions is
able to contribute up to 00% of the radio energy requirements.
The solar panel will charge the battery only under natural sunlight. It will
not deliver a charge in artificial light.
DO NOT attempt to charge the battery by placing the solar panel directly
under any kind of sun-lamp, this will cause irreversible damage to the
radio and may damage the casing. (Doing so will void all warranties)
Setting the clock
You can set the clock with either the radio turned on or off.
After the radio is charged, the display will appear with (- : --) Press and
hold BAND/TIME SET button until the hour setting begins blinking.
Select the hour by pressing Tuning UP/Down button until desired hour is
displayed. Press BAND/TIME SET button again to set the minutes. The
minute indicator should now be blinking, press the Tuning button UP/
DOWN until the desired minutes are displayed. Press BAND/TIME SET
button again to complete clock setting. The time should display solidly
with the colon blinking periodically.
Radio operation
Note:
The MMR-88 features a 90 minute auto shut off feature.
Turn on the radio, press and hold the power button for approx. /2
second, the radio will turn on and the 90 minute auto shut off icon will
appear on the display indicating the radio will auto shut off after 90
minutes of operation. If you don't require this feature, press and hold the
power button a little bit longer until the icon disappears from the display.
Turn off the radio by pressing the Power button for approx. /2 second until
the display shuts OFF. The radio will appear with the clock time in the display.