background image

01

GB

E

These servicing instructions are for use by qualified service personnel only. To reduce the risk of the electric shock, 

do not perform any servicing other than that contained in the operating instructions unless you are qualified to so.

 

CAUTION

VERY IMPORTANT PLEASE READ

Sangean suggest that you keep your AC Adapter at least 12 inches away from the radio while listening to the AM 

Band.
Your Sangean Radio is powered by an AC adapter which is a “switching” or “switch-mode” type. The DOE 

(Department Of Energy) has a Federal mandate; requiring all manufactures to use this type of power supply.
This newer power saving technology has the unfortunate side effect of causing interference to the AM radio band.
Therefore, we recommend that customers keep at least a 1 foot distance between the AC adapter and the radio. 

This interference will not affect the FM Band. If you have any questions please contact customer service at 

(888)726-4326, (562)941-9900 or [email protected]
If an AC adapter isn’t included in this model and if you wish to purchase an AC Adapter separately, please refer 

to the specifications for the AC Adapter stated on the final page of the manual, or please contact Sangean for the 

correct AC Adapter and specifications.
To learn more about the DOE mandate please visit 

http://www1.eere.energy. gov/buildings/appliance_standards/product.aspx/productid/23

Please note not all AC adapters are alike.
The AC adapter that is included with this radio is designed to be used exclusively with this device. Do not use an 

AC adapter that differs from the specifications on the AC adapter that is included.
If an AC adapter is NOT included with your radio and in order not to damage the unit and void your warranty, 

specifications for the AC Adapter are stated on the final page of the manual, or please contact Sangean for 

the correct AC Adapter and specifications. For customers in the US and Canada, please call 562-941-9900 or 

888-726-4326. For all other areas, please contact us via [email protected]
Do not use an AC adapter that does not meet the correct specifications.

For United States:

 

Cautions to the user

The changes or modifications not expressly approved by the party responsible for compliance could void the users 

authority to operate the equipment.
The equipment has been tested and found to comply with the limits for a Class B Digital Device, pursuant to part 

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a 

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed 

and used in accordance with the instruction, may cause harmful interference to radio communication. However, 

there is no guaranty that interference will not occur in a particular installation. If this equipment does cause harmful 

interference to radio or television reception, which can be determined by turning the equipment off and on, the user 

is encouraged to try to correct the interference by one or more of the following measures:

 

− Reorient or relocate the receiving antenna.

 

− Increase the separation between the equipment and receiver.

 

−  Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

 

− Consult the dealer or an experienced radio / TV technician for help.

HD Radio Technology manufactured under license from iBiquity Digital Corporation. U.S. and Foreign Patents. For 

patents see http://dts.com/patents. HD Radio and the HD, HD Radio, and "ARC" logos are registered trademarks or 

trademarks of iBiquity Digital Corporation in the United States and/or other countries.

Содержание HDR-16
































Отзывы: