Sangean DDR-66BT, Инструкция по эксплуатации

Страница: 55 / 116

GB
54
Playing audio files in Bluetooth mode
When you have successfully connected your speaker with the chosen Bluetooth device you can
start to play your music using the controls on your connected Bluetooth device.
1. Once playing has started adjust the volume to the required setting using the Volume buttons
on your radio or on your enabled Bluetooth device.
2. Use the controls on your device to play/pause and navigate tracks. Alternatively, control the
playback using Play/Pause ( ), Next track ( ) , Previous track buttons ( ) on the
radio.
Note:
1) That not all player applications or devices may respond to all of these controls.
2) When you make or receive calls, you radio will pause the music automatically to allow you to
answer the phone. Such behaviour is a function of the connected device and does not indicate
a fault with your radio.
Speaker memory and reconnecting a device
Your radio can memorize up to 8 sets of paired device, when the memory exceed this amount,
the oldest pairing history will be over written.
If your Bluetooth device already paired with the speaker previously, the unit will memorize your
Bluetooth device and it attempts to reconnect with a device in memory which is last connected. If
the last connected device is not available, your radio will try to connect to the second last device,
and so forth.
Alternatively, you can select to connect to your previously-paired device.
1. Press the Media button as needed to select Bluetooth mode.
2. Press and hold the Menu button to enter the Bluetooth menu.
3. Press the Folder up/down button until ‘Paired Devices’ is highlighted and then press the Select
button to enter a list of previously connected devices.
4. Press the Folder up/down button to highlight a previously-paired device you would like to
connect and press the Select button to confirm the selection.
Bluetooth
Paired Devices
Forget devices
System settings
Main menu
>
>