103
Brightness control
The brightness of the display can be adjusted for when the radio is in Standby and for when it is
in use. If you use the unit in the bedroom, you may prefer a lower standby brightness level than
the standard setting.
1. Press the Standby button to switch on your radio. Access the menu for the current mode by
pressing and holding the Menu button.
2. Press the Folder Up or Down buttons until 'System settings' is highlighted on the display. Press
the Select button to enter the system settings menu. Press the Folder Up or Down buttons until
'Brightness' is highlighted on the display. Press the Select button.
3. To adjust the display brightness when the radio is switched on press the Folder Up or Down
buttons until 'Normal' is highlighted on the display. To adjust the display brightness when the
radio is in standby press the Folder Up or Down buttons until 'Standby' is highlighted.Press the
Select button to enter the selected brightness adjustment mode.
4. To adjust the brightness level press the Folder Up button to select the required brightness level
Press the Select button to set the level. Press and hold the Menu button to exit.
When the radio is in Standby mode, pressing a button will cause the radio to switch to the
Normal brightness level for a few seconds. This is so that even if the Standby brightness level is
off, it is still possible to see the time by quickly pressing a button.
Main menu
Bluetooth
AUX in
Sleep
Alarms
System settings
System settings
Backlight
Equaliser
Network
Time/Date
Language
>
>
>
>
>
Brightness
Normal
Standby
Содержание DDR-66BT
Страница 1: ...GB DDR 66BT Version 1 ...
Страница 8: ...7 Controls and connections Rear View 28 NFC detection area ...