Sangean CL-100 - REV 1, Руководство пользователя

Страница: 12 / 33

11
SAME Programming
NOAA transmits coded weather and civil emergency alerts using
Specific Area Message Encoding (S.A.M.E. technology).
SAME enables you to customize your CL-100 to receive messages
relevant to your area, therefore reducing unwanted alerts. SAME is
activated by programming a 6 digit code – called a FIPS code – into
your radio.
The CL-100 is capable of being programmed with up to 25 different FIPS
location codes. To program the radio with the FIPS code for your area,
follow the steps below.
1. Press the MENU button and press the TUNE DOWN to scroll down
to the County Code, and press the SELECT button to enter
the menu. Then All, Multiple and Single will be displayed.
Choose Single if you want to receive only alerts sent to one county
(or FIPS code). Choose Multiple if you want to receive alerts from
more than one county that you have programmed. Choose All to
receive all alerts your station sends regardless of the FIPS codes.
2. Select Single to enter the Single County menu. Select New Code
and enter a six digit sequence to set up the FIPS code. Use the
TUNE UP/DOWN to select the desired number. Then use the VOL
UP button to select the second digit. Repeat this sequence until you
have set all six digits as desired, and press the SELECT button to
save the code and exit to Single County menu. More than one set of
FIPS codes can be stored under Single County mode, but only one
set of code can work at a time. The codes that are stored will show
in the Single County menu list. Press the TUNE UP/DOWN to
highlight the stored code, and press SELECT button to overwrite an
existing code. When a code is highlighted, press VOL UP/DOWN
button to enable/disable the code.