Sangean CL-100 - REV 1, Руководство пользователя

Страница: 11 / 33

10
Listening to Weather Broadcast
1. Press the WEATHER BAND button to hear the voice broadcast.
Then switch on the Weather Alert ON/OFF to put the weather /
hazard receiver into stand-by mode.
2. Press the MENU button and press the TUNE DOWN to scroll down
to Weather Channel, and press the SELECT button to enter
the menu. The LCD display will show the channel number.
Press TUNE UP/DOWN to select the desired channel. Press the
SELECT button to save the Channel Setting and return to the main
menu list.
Your are now ready to use your CL-100. To listen to the
weather channel, press the WEATHER BAND button while the
Weather Alert ON/OFF is switched on.
Place the radio where it gets the best reception. The LCD display will
show the specified weather channel number in the upper right hand
corner when the weather / hazard receiver is in stand-by mode.
To turn off the weather channel press the WEATHER BAND
button again. Your radio can be further programmed to respond to
alerts in specific areas. To custom program your radio for alerts in
your area only, see the SAME programming instructions on
page 11-12.
GB