Sangean BLUEBOX BB-100, Руководство пользователя

Страница: 12 / 13

11
GB
Disconnecting your Bluetooth device
1. Press and hold the Bluetooth pairing button for 2 seconds on the radio to disconnect with your Bluetooth
device or turn off the Bluetooth function on your Bluetooth device to disable the connection. You will
hear a beep and the Bluetooth status indicator on the radio will flash a fast blue to show the radio is
discoverable again for pairing.
2. You can also press the Band/Step button to select any mode other than the Bluetooth mode to disable
the connection.
Reset the radio
If your radio fails to operate correctly or some digits on the display are missing or incomplete, please
carry out the following procedure.
1. Make sure your radio is switched off.
2. Press and hold the Preset button 5 and Band/Step button at the same time for more than 2 seconds,
the “dEF” symbol will appear and flash on the display. Continue holding down these two buttons jointly
until all the icons show on the display. All saved preset stations and Bluetooth memory will be cleared
and the radio will revert to the factory default settings.
Aux In socket
The Aux In socket is to connect an audio source (like MP3 player or CD walkman) to listen to the audio
program via the speaker.
Remove the rubber cover, connect the audio source with a 3.5 mm (not included) audio connector wire,
and rotate the Volume Control knob to your preferred listening level.
Note:
You’ll need to plug in a 3.5 mm audio connector in order to change to the Aux in band.