![Sangamo CHPWIFI Скачать руководство пользователя страница 9](http://html1.mh-extra.com/html/sangamo/chpwifi/chpwifi_user-manual_4645377009.webp)
8
Installation Plan B
Receiver’s
position
Thermostat’s
position
Boiler
as shown, and then press down on the button
Clip
Caution:
potential of 230V
on connection.
Risk of electric
shock
N/C COM N/O
TH TH
Boiler
LS LR
N/C COM N/O
Boiler
!
Our products are designed to comply with the recommended codes of practice and is to be installed
and serviced by competent persons in accordance with the relevant wiring regulations.
Warning: Before any installation or maintenance, ensure that the electrical supply is switched off at
the breaker.
When installing the Thermostat directly to the boiler, ensure the receiver is within the WiFi coverage area.
Note: Distance between thermostat and receiver cannot be greater than 100m (open field).
When the Thermostat is connected directly to the boiler, item 8 of the configuration should be “ON” .[Page 5].
As default it is set to OFF
1. Install receiver as gateway with plug adapter
1. Install rear bulkhead
2. Press and rotate to clip in the adapter
The icon “ “ aligned with the button as
shown, and then press down the button
3. Complete
2. Installation Plan B Wiring
1. Remove the buckle with
a flat headed screwdriver
2. Take off safety cover
3. Wire into connections
4. Reinstall safety cover
1. Potential Free Relay
2. 230V Relay
Black & Grey
Control Cables
Black & Grey
Control Cables
If NC is required, terminate
into COM & NC
Содержание CHPWIFI
Страница 1: ...U S E R M A N U A L Fort Programmable The rmostat with R F and WiFi CHPWIFI...
Страница 15: ...14 Notes...