7. Cooling function
- Press the 'Mode' button (function) until the 'Cool' icon appears.
- Press the "
▲
" or "
▼
" button to select the desired temperature.
- Press the 'Speed' button to select the wind speed.
8. Dehumidifying function
- Press the 'Mode' button (function) until the 'Dehumidify' icon appears.
-The temperature is automatically set 2 degrees lower than the room
temperature.
- The wind speed is automatically set to 'low'.
9. Fan speed
- Press the 'Mode' button until the 'Fan' icon appears.
- Select the fan speed by pressing the 'Fan speed' button.
10. Heating function (this function is not available on this model)
5. Timer function
Timer ON
- When the air conditioner is off, press the 'Timer' button and select
the desired time using the temperature and timer buttons.
- The timer duration (Preset ON Time) is displayed on the control
panel.
Timer OFF
- When the air conditioner is on, press the 'Timer' button and select
the time at which you want the unit to turn off using the temperature
and timer buttons.
- The timer duration (Preset OFF Time) is displayed on the control
panel.
6. Evacuation
- When the unit is not in use for a period of time, remove the rubber
part from the exhaust outlet underneath the unit and connect the
exhaust hose to the outlet at the bottom of the air conditioner. The
water from the tank drains out.
- If the water pump is damaged, this method of continuous drainage
can be used. By using this method, the water pump is not activated
but the device can be used without issue.
- If the water pump is damaged, intermittent drainage can be used.
When the "tank full" indicator light comes on, connect the exhaust
