SANEI ELECTRIC SK1-21, Техническое руководство

Страница: 39 / 60

３９
SK1-21/31
4- 5
．
Memory switch setting menue
（ 1 ）
COMMON SETTING
Menu Default Value Description
PAPER FEED OFF
OFF
ON(10mm)
ON(20mm)
ON(30mm)
Enables/disables paper feed after closing the print head.
・
When paper feed is ON, print feed amount.
（
Cut the paper after feeding the paper
）
・
The value is changeable using the DC2K command.
OFFLINE BUSY ON ON
OFF
Enables/disables OFFLINE when the error occurs.
＜
At selecting ON
＞
・ OFFLINE is enabled when an error occurs. The printer stops
printing and holds received data until the error is cleared.
＜
At selecting OFF
＞
・
ONLINE is enabled when error occurs. Receiving data
Is continuously processed and printing data is not stored.
Setting the command and status response are enabled.
SELECT
SENSOR Reflection Reflection
Transmission
Selects the mark sensor for label printing.
・ Reflection ･･･ Detect by Black mark sensor
・ Transmission ･･･ Detect by Gap sensor.
MARK
DETECTION
OFF OFF
ON
Enables/disables the Black mark sensor/Gap sensor functions.
＊ Enables Black mark and Gap sensor models.
MARK
RE-DETECTIN
G OFF OFF
ON
Enables/disables re-detecting function when the power is
turned ON.
CHARACTER
TABLE PC437 KATAKANA
PC437 / PC850
PC852 / PC857
PC858 / PC863
PC865 / PC866
WPC1252 / PC860
Selects the characters.
PRINT
DENSITY 100% 80%
90%
100%
110%
120%
130%
140%
150%
Specifies the printing density.
PRINT WIDTH Comply with
classified
paper width
80/72
60/56
58/54
83/80 Selects the paper width.
(Printing width is set at the factory)