Installation guide for Sandtoft TLE Dry Verge
3
3) Locate the first verge unit over
the eaves closure and click into
position.
Screw
through
an
appropriate fixing hole into the
centre of the vertical batten using a
35 x 4mm stainless steel screw
(supplied).
4) Fit the next verge unit by locating
over the verge tile and clicking the
tail over the head of the first verge
unit. Screw through an appropriate
fixing hole into the centre of the
batten. Follow this procedure for
each tile course up to the ridge. Nail
all verge tiles. At the right hand
verge, tiles can also be secured
using tile clips if required.
