TPMS1209C01 User Manual
Page 7 of 23
Below are the functions of each index interface.
Index Function
1
Transmitter ID Inquiry and Programming
2
Standard Pressure Inquiry and Programming
3 Pressure
and
Temperature
Unit Inquiry and Programming
4
System Time Inquiry and Programming
5
Alarm Record Inquiry
6 Transmitter
ID
Deletion
Standard Pressure Inquiry
The pressure alarm that issued by monitor is based on the standard pressure.
The system will issue the high pressure alarm when the tire pressure is 25% higher than the standard
pressure.
The system will issue the low pressure level 1 alarm when the tire pressure is 12.5% lower than the
standard pressure.
The system will issue the low pressure level 2 alarm when the tire pressure is 25% lower than the standard
pressure.
The system will issue the low pressure level 3 alarm when the tire pressure is 50% lower than the standard
pressure.
It is necessary to set a proper standard pressure to ensure the system working normally. The default
standard pressure set in factory is 32 psi. User can adjust the standard pressure according to actual needs.
Under the normal interface, press E key for 3 seconds to enter the monitor
programming interface and display the index interface 1.
Press S key to switch to the index interface 2, then press E key to enter the
standard pressure inquiry interface.
The screen displays the standard pressure for front left tire firstly. The default
standard pressure is 32 psi.
