KSwitch R3 UMP Unmanaged PoE Ethernet Switch - Preliminary User Guide, Rev. 0.9
// 22
4.2.
Rear Side Features
4.2.1.
Power Connectors
Depending on the switch’s port variant the switch includes up to three 100/240VAC standard IEC 320 power
connectors. To avoid accidental removal of the power cable, after inserting the power cable, close the lock lever.
The switch’s total power budget depends on the number of power connections with 250 W (10-port), 490 W (18-port),
and 730 W (26-port).
Figure 6: Rear Side (10-port, 18-port and 26-port)
Connect to a power installation with a ground that meets the ground requirements specified
in your local, national and international region.
Mating power connector: 3-pin IEC 320 connector
