KSwitch D3 Unmanaged Fast Ethernet Switch - Preliminary User Guide, Rev. 0.9
// 27
4.3.
Rear Side Features
The mounting holes for the DIN-Rail clip enable the orientation of the DIN-Rail clip to be changed by 180°. Sets of
mounting holes on the top and bottom (10-port) and left and right (16-port) on the rear side, enable installation of the
wall mount plates. For mounting information, see Chapter 5/Mounting.
Figure 12: Rear Side View (10-port and 16-port)
1
DIN-Rail clip and 3x mounting screws
(orientation changeable by 180° using
orange/blue sets of mounting screw
holes)
2
Two wall mounting plates with 2x screws
3
Four wall mounting plates with 2x screws
3
2
2
1
1
3
