KSwitch D3 Unmanaged Fast Ethernet Switch - Preliminary User Guide, Rev. 0.9
// 25
4.2.2.
DC Terminal Block Alarm Relay Contacts (10-port)
The alarm relay contacts, in the middle of the DC terminal block connector, detect an Ethernet port failure and forms
a short circuit. The alarm relay output is “Normal Close”.
To activate the alarm relay insert the wires into the corresponding contacts on the DC terminal block.
Figure 10: Alarm Relay Contacts (10-port)
1
Alarm system contact
2
Extra power system contact
When attaching wires to the DC terminal block’s contacts consider:
•
DC terminal block pitch, 5.08 mm
•
Wire size range: Solid wire: 12~24 AWG and Stranded wire: 12~24 AWG
•
Wire length 3 m (9.84 ft.) maximum
•
Wire strip length 7 mm (0.28 in)
1
2