COMe-cHL6 / User Information
COMe-mBT10 User Guide
// 51
7.5.2.2.
H/W Monitor
Feature
Value/Options
Description
CPU Temperature (Analog) xx°C
Shows the measured temperature of the CPU Diode with onboard HWM
CPU Temperature (DTS)
xx°C
Shows the internal digital CPU temperature (DTS)
Module Temperature
xx°C
Shows the internal hardware-monitor temperature
CPU FAN
xxxx rpm
Shows the fan speed of onboard FAN connector
Fan Pulse
2
Number of pulses the CPU fan produces during one revolution. Range 1-4
FAN Control
Disabled
Manual
Auto
Set fan control mode. 'Disable' will totally stop the fan
Fan Trip Point
45
Temperature where fan accelerates. Range 20 - 80°C
Fan Speed
70
Manual fan speed in %. Minimum value is 30 (in Manual mode only)
Trip Point Speed
50
Fan speed at trip point in %. Minimum value is 30. Fan always runs at 100% at Tjmax - 10°C
Reference Temperature
CPU Temperature (Analog)
Module Temperature
Determines the temperature source which is used for automatic fan control
External FAN
xxxx rpm
Shows the fan speed of external COMe FAN
Fan Pulse
2
Select the number of pulses the external fan produces during one revolution. Range 1-4
FAN Control
Disabled
Manual
Auto
Set fan control mode. 'Disable' will totally stop the fan
Fan Trip Point
45
Temperature where fan accelerates. Range 20 - 80°C
Fan Speed
70
Manual fan speed in %. Minimum value is 30 (in Manual mode only)
Trip Point Speed
50
Fan speed at trip point in %. Minimum value is 30. Fan always runs at 100% at Tjmax - 10°C
Reference Temperature
CPU Temperature (Analog)
Module Temperature
Determines the temperature source which is used for automatic fan control
Widerange Vcc
x.xx V
Shows the Module Main Input Voltage
5.0V Standby
x.xx V
Shows the 5V Standby Voltage input
Batt volt at COMe pin
x.xx V
Shows the RTC Battery Voltage input measured at COMe connector
Downloaded from