21
• If the mains cable is damaged and needs to be replaced, this should be done by a qualified
person using the proper tools, so as to avoid any accidents.
• The hob must be connected directly to the mains supply, an omnipolar circuit breaker must
be installed with a minimum gap of 3mm between the contacts.
• The installer must ensure that the correct electrical connection has been made and that it
complies with safety regulations.
• The mains cable must not be bent excessively or compressed.
• The mains cable must be checked regularly and only replaced by a qualified person.
Wiring the hob
• Before proceeding with the electrical connection, verify that the current carrying capacity of the
system and the socket is adequate for the maximum power rating of the hob.
• If there is no dedicated hob circuit and fused switch, they must be installed by a qualified electrician
before the hob is connected.
• The fused switch must be easily accessible once the hob has been installed.
• Do not use adaptors, multiple sockets and/or extension leads.
• A circuit breaker with a contact opening of at least 3mm, rated 32A and delayed functioning type
must be installed inside the supply circuit.
• The cable must have these minimum specifications. Type H05VV-F or H05RR-F 4X2.5mm
2
for 3 phase
or 3X6mm
2
for single phase. You will find the connection diagram shown on the bottom of
your appliance and in this instruction book (for single phase connection).
• Make sure the cable is routed away from hot parts.
• An incorrect connection might damage your appliance. The guarantee will not cover such damages.
• All repairs must be carried out by an authorised service personal or a qualified electrician.
• Make sure your hob is disconnected from the mains supply before any maintenance.
• Cooking hobs are not provided with a supply cord.
SINHOBB13/W13_IB.indd 21
05/08/2013 12:55